Monica Thayer is recovering from a near-death experience on the job, photo below. Monica Thayer is lucky to be alive after an industrial accident that nearly ripped off her skull during her first week on the job. On July 2, Thayer, 25, of Norton, Ohio, was working at JR Engineering which manufactures and sells precision components for companies like Ford, Lockheed Martin and the United States government. She was in the Barberton factory cleaning a machine that cuts steel tubing when her long brown hair, which was pulled back, got caught and yanked her face first into the device. “My biggest fear was that I would be moments away from getting rescued, and then it would start-up and kill me,” she told WDAF-TV. “The next thing I realized, it had sucked me up and pulled me behind the bar that started to spin as I was cleaning the machine out, and up against the cutter.” Unable to reach the safety stop button, Thayer screamed for help. "Luckily, I have a big mouth and a loud voice, so they could hear me over the machine." Thayer told WEWS-TV. Rescue crews spent 20 minutes trying to free Thayer from the machine. Although she knew the hair had been ripped out, she didn't realize her scalp had been torn off as well. "The only thing I thought of was I was going to bleed to death or the machine was going to start up and just snap my neck," Thayer told WEWS-TV. Surgeons at Akron General spent eight hours stopping Thayer's head from bleeding and saved her life. Kathy Mefford, human relations director for JR Engineering, told the Akron Beacon Journal that the company is still investigating the incident and could not immediately comment. The medical bills will be tough for Thayer to cover, since her new job only pays $8 per hour and doesn't provide health insurance. Although Thayer will never have hair or eyebrows again, she told WEWS-TV that the pain on her head isn't as bad as expected since her nerves were also ripped out. She still feels "a burning sensation" in the areas of her legs where skin was grafted. Thayer doesn't blame the company for what she calls a, "freak accident," but wants the machine's manufacturer to make safety improvements. "I don't want this to happen to anybody else. It was horrific. It was terrifying," Thayer told the station. "I would never wish this upon anybody, not even my worst enemy." Barberton Fire Chief Kim Baldwin said he did a preliminary investigation Tuesday and told WKYC-TV that it appears all safety functions were working properly. He handed the investigation over to the Occupational Safety and Health Administration, which is looking into the accident, according to spokeswoman Brigitte Frank.
|
#1
●
07-27-2012, 12:16 AM
|
|
Woman Loses Scalp in Industrial Accident
<script src="http://player.ooyala.com/player.js?deepLinkEmbedCode=A3cWVnNTobmJ3yJB37MaDG zT4w3g9frO&height=320&embedCode=A3cWVnNTobmJ3yJB37 MaDGzT4w3g9frO&video_pcode=o3ZXA6AW_ODSH73PHaEhBxc qUpwq&width=570"></script> Monica Thayer is recovering from a near-death experience on the job, photo below. Monica Thayer is lucky to be alive after an industrial accident that nearly ripped off her skull during her first week on the job. On July 2, Thayer, 25, of Norton, Ohio, was working at JR Engineering which manufactures and sells precision components for companies like Ford, Lockheed Martin and the United States government. She was in the Barberton factory cleaning a machine that cuts steel tubing when her long brown hair, which was pulled back, got caught and yanked her face first into the device. “My biggest fear was that I would be moments away from getting rescued, and then it would start-up and kill me,” she told WDAF-TV. “The next thing I realized, it had sucked me up and pulled me behind the bar that started to spin as I was cleaning the machine out, and up against the cutter.” Unable to reach the safety stop button, Thayer screamed for help. "Luckily, I have a big mouth and a loud voice, so they could hear me over the machine." Thayer told WEWS-TV. Rescue crews spent 20 minutes trying to free Thayer from the machine. Although she knew the hair had been ripped out, she didn't realize her scalp had been torn off as well. "The only thing I thought of was I was going to bleed to death or the machine was going to start up and just snap my neck," Thayer told WEWS-TV. Surgeons at Akron General spent eight hours stopping Thayer's head from bleeding and saved her life. Kathy Mefford, human relations director for JR Engineering, told the Akron Beacon Journal that the company is still investigating the incident and could not immediately comment. The medical bills will be tough for Thayer to cover, since her new job only pays $8 per hour and doesn't provide health insurance. Although Thayer will never have hair or eyebrows again, she told WEWS-TV that the pain on her head isn't as bad as expected since her nerves were also ripped out. She still feels "a burning sensation" in the areas of her legs where skin was grafted. Thayer doesn't blame the company for what she calls a, "freak accident," but wants the machine's manufacturer to make safety improvements. "I don't want this to happen to anybody else. It was horrific. It was terrifying," Thayer told the station. "I would never wish this upon anybody, not even my worst enemy." Barberton Fire Chief Kim Baldwin said he did a preliminary investigation Tuesday and told WKYC-TV that it appears all safety functions were working properly. He handed the investigation over to the Occupational Safety and Health Administration, which is looking into the accident, according to spokeswoman Brigitte Frank. <div style='text-align:center'> <object width='560' height='345' id='FiveminPlayer' classid='clsid:d27cdb6e-ae6d-11cf-96b8-444553540000'> <param name='allowfullscreen' value='true'/> <param name='allowScriptAccess' value='always'/> <param name='movie' value='http://embed.5min.com/517426145/'/> <param name='wmode' value='opaque' /> <embed name='FiveminPlayer' src='http://embed.5min.com/517426145/' type='application/x-shockwave-flash' width='560' height='345' allowfullscreen='true' allowScriptAccess='always' wmode='opaque'> </embed> </object> <br/> </div> · |
|
#2
●
07-27-2012, 02:29 AM
|
|
Re: Woman Loses Scalp in Industrial Accident
O-U-C-H-!!! She won't be smiling when they take them band aids off!I feel sorry for her because she had a really nice before picture, she just won't get laid as often!
__________________ You can not imagine the immensity of the Fuck I do not give. |
|
#4
●
07-27-2012, 11:19 AM
|
|
Re: Woman Loses Scalp in Industrial Accident
I'm sure she will get plenty in the lawsuit but will it be enough to make it worth going through that. No hair and scars galore would make any payout seem shitty... especially for a young chicky like her |
|
#9
●
07-27-2012, 07:58 PM
|
|
Re: Woman Loses Scalp in Industrial Accident
You never know. With all of the advances in medical procedures and hair restoration, and having youth on her side, she may return to almost what she originally looked like. She has a good attitude. |
|
#10
●
07-27-2012, 09:27 PM
| ||||||||
| My Rank: LANCE CORPORAL Poster Rank:2763 Join Date: Jan 2010 Posts: 147 Mentioned: 0 Post(s) Quoted: 5 Post(s)
| ||||||||
|
Re: Woman Loses Scalp in Industrial Accident
Can someone fill in the gaps for me? If it was a work related accident then why isn't it covered by worker's compensation? If she was working as a sub contractor (for herself) then she would have or should have had sickness and accident insurance. We have very different laws here in Australia. OH&S laws governing machinery and the law in general are designed so even those that are intent on self harm are protected. She is a very lucky lady to still be alive. |